Adding Amenities

Adding Amenities

Film Amenities In RTS

To ensure that Amenities are applied when you schedule a show, make sure you applied the amenity to both the Auditorium and the Film.
WarningNOTE: Be sure that you are using the Showtimes New Scheduler when scheduling films. Your Amenities may not display correctly in your RTS App if you use the old scheduler.

Selected Amenities In Each Auditorium

Please be sure that your desired amenities are selected in your Auditorium Configuration.

  • This can be double checked by navigating to Set Up -> Auditoriums.



  • Select your Auditorium from Schedule Locations.
  • Choose the "Settings" tab.
  • Check on the desired amenities.
  • "Close".

If The Film Is Not Scheduled

You will need to make sure your Amenities are enabled. This can be found under your desired film.

  • To find the appropriate film, navigate to Set Up -> Films and select your film.
  • Once your film is selected choose the "Settings" Tab.



  • Check on any and all desired amenities.
  • Select "Save".
  • Select "Close".

If The Film Is Already Scheduled

If your film is already in the schedule you will need to "manually" edit each film to include the desired amenities.

  • To do this navigate to Actions -> Schedule -> Showtimes New Scheduler.
  • Double-click on the film, or right-click and select "Edit".



  • Scroll through to the desired amenity and set to "True".
  • Do this until all desired amenities are selected.
  • Select "Save".
  • Select "Close".
  • To finish and make sure these changes appear, you will need to Restart Your Internet Server.
  • If you do not see your amenities appear after around 15 minutes, please contact RTS at (865) 212-9703.

See Also